Micronz

Application-orientated and flexible to meet the highest demands

– Modular – System selection specifically for your application
– Flexible – Perfect integration into any laboratory
– Easy to use – Display with touch function and intuitive menu
– Fast – Favorites function with direct access for recurring volumes

As a reliable source of ultrapure water, the arium® pro series offers a flexible and modular system which, compared to conventional devices, demonstrates excellent added value.

All systems meet and exceed the ASTM Type 1 water quality standards and ensure the best reproducible results in their class. Up to 2 liters of consistently high-quality ultrapure water with a conductivity of 0.055 μS/cm (018,2 MO + cm) can be dispensed per minute. The ultrapure water is virtually microorganism-free when a Sartopore® 2 150 final filter is used.

Additional information here.

All lab water systems here.

The arium® comfort lab water systems combine pretreatment and final treatment technologies into one device. Featuring a compact design, they provide ultrapure and pure water of the highest quality. The pure water produced is kept in a closed arium® bagtank. This guarantees optimal
storage of the purified water and protects against secondary contamination.

The replaceable bag eliminates time-consuming tank cleaning intervals. The optional UV lamp (185 | 254 nm) built into the ultrapure water loop also
prevents microbiological growth and reduces the TOC content to a minimum.

The current TOC value is continuously checked by an optionally integrated TOC monitor and displayed for convenient verification.

arium® comfort II
The arium® comfort II delivers up to 2 L/min of ASTM Type 1 ultrapure water, as well as 5 L/h or 10 L/h of Type 2 pure water. The additional EDI technology downstream from the RO modules optimizes the system and offers highly efficient ion retention with a quality ranging from 0.2 to 0.07 μS/cm.

arium® comfort I
The arium® comfort I provides up to 2 L/min of ASTM Type 1 ultrapure water, as well as 8 L/h or 16 L/h of Type 3 pure water. Feed water is treated with a pretreatment cartridge and downstream RO modules; continuous permeate backflushing effectively prevents deposits and fouling.

Additional information here.

All lab water systems here.

Ideal for small labs Deionised Water requirements.

Available in single and dual manifold formats.

Conductivity Meter in PDL Casing with 24V Transformer is strongly recommended with slimline and jumbo systems to allow accurate readings of permeate conductivity.

Pre-filtration sediment and carbon removal recommend. Please see water housings and filters for more detail.

Ideal for small and medium size labs Deionised Water requirements.

Available in single and dual manifold formats.

Conductivity Meter in PDL Casing with 24V Transformer is strongly recommended with slimline and jumbo systems to allow accurate readings of permeate conductivity.

Pre-filtration sediment and carbon removal recommend. Please see water housings and filters for more detail.

System includes mineral reduction processor, carbon filter cartridge, post carbon filter cartridge, high efficiency GRO-75EN Reverse Osmosis Cartridge, air gap faucet and storage tank.

Improves equipment life and performance by removing at least 95%+ of all dissolved solids that cause scale buildup especially useful on Water Coolers (Office Coffee Service – OCS installations), and other evaporative equipment that are not emptied each day less frequent deliming of equipment means reduced maintenance and service costs.

Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption.

NSF/ANSI Standard 58 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means protects against taste- and odor-causing contaminants while removing dirt, particulates and dissolved minerals two-part design makes installation flexible and small footprint easily fits in any office kitchen.

Sanitary cartridge replacement is simple, quick and clean; internal filter parts are never exposed to handling or contamination.

Ideal for small labs where small amounts of RO are required or as pre-filtration option for Type 1 or 2 water systems.

Ideal for Lab Production water and Spirit Production.

250l/hr Reverse Osmosis System.

Ideal for Lab Production water and Spirit Production.

500l/hr Reverse Osmosis System.

Ideal for Lab Production water and Spirit Production.

1000l/hr Reverse Osmosis System.

Ideal for sediment and carbon removal from source water.

Available in 10″ and 20″ Jumbo formats.

Single and Dual housing manifolds available.

Filters available: 50-5um Polyspun, 20-1um Polyspun, 5um Carbon block and 0.5um Carbon block

For more detail on filter types, click here.

For more detail on housings, click here.